phone: 305-424-8353

DOBINSONS FRONT SWAY BAR EXTENSION BRACKET - SE59-516

$45.00
SKU:
SE59-516
Minimum Purchase:
2 units

  • For 3" to 6" lift heights
  • Zinc plated steel with all hardware supplied
  • Simple bolt-on design
  • Reduces bushing wear and corrects sway bar angle to function properly
  • Sold as a pair, 1 needed per vehicle
   
--
Dobinsons Spring & Suspension front Swaybar Extensions to suit 3" to 6" of lift on Toyota Land Cruiser 78, 79, 80 Series. 80 series, only 9/1991 plus models. These are fixed brackets once installed and will take the pressure off your sway bar and sway bar bushings, allowing them to work properly. Corrects the position of the sway bar when the vehicle is lifted 3" or more, providing better handling. NOTE: These are sold as a pair. For suspension lift kits between 75mm/3" and 90mm/3.5" castor correction is required, and also adjustable panhard rods are highly recommended. For customers wanting to maximize the off-road performance extended sway bar links and extended brake lines are also recommended. Extending the vehicles bump stops and driveshaft modification may also be required depending on the application. For suspension lift kits exceeding 90mm/3.5" considerable alignment parts are required. Castor correction, adjustable panhard rods, sway bar extensions, extended bump stops, extended brake lines, gearbox spacing, driveshaft modification, adjustable/modified rear trailing arms and adjustable steering arm modifications are required along with other driveline, suspension and steering modifications which may also be required. Note: For Off Road Use Only

Addon Desc:
SE59-516 Front Sway Bar Extensions (Required For 60mm Lift)
Price:
45
Warning: This product can expose you to chemicals that are known to the State of California to cause cancer. For more information, visit www.P65warnings.ca.gov.